China 100W Single Output Switching Power Supply LRS-100 series manufacturers and suppliers

100W Single Output Switching Power Supply LRS-100 series

Short Description:

Universal AC input/ full range

Withstand 300VAC surge input for 5 second

Protections: Short circuit / Overload / Over voltage

Cooling by free air convection

LED indicator for power on

100% full load burn-in test

High operating temperature up to 70℃

High efficiency, long life and high reliability

2 years warranty

Send email to us

Product Detail

Product Tags

Features

100W Single Output Switching Power Supply LRS-100 series

AC input range selectable by switch
Withstand 300VAC surge input for 5 second
Protections: Short circuit / Overload / Over voltage/ Over temperature
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
High operating temperature up to 70ºC
High efficiency, long life and high reliability
2 years warranty
more efficient, more thinner, less no-load consumption than old series
Universal AC input/ full range

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. Line regulation is measured from low line to high line at rated load.
5. Load regulation is measured from 0% to 100% rated load.
6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.

Specifications

SPECIFICATION

OUTPUT

Model

LRS-100-3.3

LRS-100-5

LRS-100-12

LRS-100-15

LRS-100-24

LRS-100-36

LRS-100-48

DC Voltage

3.3V

12V

15V

24V

36V

48V

Rated Current

20A

18A

8.5A

4.5A

2.8A

2.3A

Current Range

0~20A

0~18A

0~8.5A

0~7A

0~4.5A

0~2.8A

0~2.3A

Rated Power

66W

90W

102W

105W

108W

100.8W

110.4W

Ripple & Noise

100mVp-p

120mVp-p

150mVp-p

200mVp-p

Voltage Adj. Range

2.97~3.6V

4.5 ~ 5.5V

10.2~ 13.8V

13.5~18V

21.6~28.8V

32.4~39.6V

43.2~52.8V

Voltage Tolerance

±3.0%

±2.0%

±1.0%

Line Regulation

±0.5%

Load Regulation

±2.0%

±1.0%

±0.5%

Setup, Rise Time

500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load

Hold Up Time

55ms/230VAC 10ms/115VAC at full load

INPUT

Voltage Range

85 ~ 264VAC 120 ~ 373VDC

Frequency Range

47 ~ 63Hz

Efficiency

84.50%

86%

88%

88.50%

90%

90.50%

91%

AC Current

1.9A/115VAC 1.2A/230VAC

Inrush Current

Cold start 50A/230VAC

Leakage Current

<0.75mA / 240VAC

PROTECTION

Over Load

110 ~ 150% rated output power

Protection type: Hiccup mode, recovers automatically after fault condition is removed

Over Voltage

3.8~4.45V

5.75~6.75V

13.8 ~ 16.2V

18.75~21.75V

28.8 ~ 33.6V

41.4~48.6V

55.2~ 64.8V

Protection type: shut down o/p voltage, re-power on to recover

ENVIRONMENT

Working Temp.

-30 ~ +70℃ (Refer to “derating curve”)

Working Humidity

20 ~ 90% RH non-condensing

Storage Temp., Humidity

-40 ~ +85℃, 10 ~ 95% RH

Temp. Coefficient

±0.03%/℃ (0 ~ 50℃)

Vibration

10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes

SAFETY & EMC

Safety Standards

UL60950-1, TUV EN60950-1, EN60335-1/-2-16, CCC GB4943 approved

Withstand Voltage

I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.25KVAC

Isolation Resistance

I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃ / 70% RH

EMC Emission

Compliance to EN55022(CISPR22), GB9254 CLASS B, EN55014 EN 61000-3-2,-3

EMC Immunity

Compliance to EN61000-4-2,3,4,5,6,8,11, EN61000-6-2(EN50082-2), heavy industry level, criteria A

OTHERS

Dimension

129*97*30mm (L*W*H)

Weight

0.34Kg

Packing

40pcs/carton/14.6kg/0.92CUFT

NOTE

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance: includes set up tolerance, line regulation and load regulation.4. Line regulation is measured from low line to high line at rated load.

5. Load regulation is measured from 0% to 100% rated load.

6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.