China 2000W Single Output switching power supply SV-2000 series manufacturers and suppliers

2000W Single Output switching power supply SV-2000 series

High efficiency, high reliability

100% full load burn-in test

Protection: Short circuit/ Over load / Over voltage

Dimensions:300*150*130(mm)

Send email to us

Features

2000W Single Output switching power supply SV-2000 series

High efficiency, high reliability

100% full load burn-in test

Protection: Short circuit/ Over load / Over voltage

Dimensions:300*150*130(mm)

Specifications

SPECIFICATIONS
OUTPUT
Model	SV-2000-12	SV-2000-15	SV-2000-24	SV-2000-30	SV-2000-110
DC Voltage	12V	15V	24V	30V	110V
Rated Current	166A	133.0A	83.3A	66.0A	18A
Current Range	0-166A	0-133.0A	0-83.3A	0-66.0A	0-18.0A
Ripple & Noise	160mV	180mV	190mV	320mV	900mV
Voltage Adj. Range	0.50%	0.50%	0.50%	0.50%	0.50%
Setup&Rise Time	100ms,50msat full load
Hold Up Time	20ms at full load
INPUT
Voltage Range	AC220V±20% 47～63HZ
AC Current	3.2A/115V1.6A/230V
Efficiency	86%	87%	87%	89%	89%
Inrush Current	40A/230V
Leakage Current	<0.5MA/230VAC
PROTECTION
Over Load	110～150%
Over Load	Protection type: Shut down o/p voltage, re-power on to recover
Over Voltage	110～150%
Over Voltage	Protection type: Shut down o/p voltage, re-power on to recover
SAFETY
Withstand Voltage	I/P-O/P:1.5KVAC/1min I/P-F/G:1.5KVAC/1min
Isolation Resistance	O/P-F/G:0.5KVAC /1min
Gross weight	6.0kg
Dimension	300150130mm
NOTE
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1μ &47μparallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation 4.The power supply is considered a component which will be installed into a final equipment. The final equipment mustbe re-confirmed that it still meets EMC directives.