page_banner

Products

350W Single Output Switching Power Supply NES-350 series Featured Image

350W Single Output Switching Power Supply NES-350 series

Short Description:

AC input range selectable by switch

Protections: Short circuit / Overload / Over voltage

Cooling by free air convection

LED indicator for power on

100% full load burn-in test

High efficiency, long life and high reliability

2 years warranty

Send email to us

Product Detail

Product Tags

Features

350W Single Output Switching Power Supply NES-350 series

AC input range selectable by switch

Protections: Short circuit / Overload / Over voltage

Cooling by free air convection

LED indicator for power on

100% full load burn-in test

High efficiency, long life and high reliability

2 years warranty

Specifications

SPECIFICATION
OUTPUT
Model	NES-350-5	NES-350-7.5	NES-350-12	NES-350-15	NES-350-24	NES-350-36	NES-350-48
DC Voltage	5V	7.5V	12V	15V	24V	36V	48V
Rated Current	60A	46A	29A	23.2A	14.6A	9.7A	7.3A
Current Range	0~60A	0~46A	0~29A	0~23.2A	0~15.6A	0~9.7A	0~7.3A
Rated Power	300W	345W	348W	348W	350.4W	349.2W	350.4W
Ripple & Noise	150mVp-p	150mVp-p	150mVp-p	150mVp-p	150mVp-p	240mVp-p	240mVp-p
Voltage Adj. Range	4.5 ~5.6V	6 ~ 9V	10~ 13.5V	13.5~18V	20~26.4V	32~40V	41~56V
Voltage Tolerance	±3.0%	±2.0%	±1.5%	±1.0%	±1.0%	±1.0%	±1.0%
Line Regulation	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
Load Regulation	±2.0%	±2.0%	±1.0%	±0.5%	±0.5%	±0.5%	±0.5%
Setup, Rise Time	1000ms, 50ms/230VAC 1000ms, 50ms/115VAC at full load
Hold Up Time	20ms/230VAC 16ms/115VAC at full load
INPUT
Voltage Range	90 ~ 132VAC / 180 ~ 264VAC selected by switch 254 ~ 370VDC
Frequency Range	47 ~ 63Hz
Efficiency	78%	80%	84%	87%	87.50%	87.50%
AC Current	7A/115VAC 4A/230VAC
Inrush Current	40A/115VAC 60A/230VAC
Leakage Current	<3.5mA / 240VAC
PROTECTION
Over Load	105 ~ 135% rated output power
Over Load	Protection type: Hiccup mode, recovers automatically after fault condition is removed
Over Voltage	5.75~7.5V	13.8 ~ 16.2V	18~21V	27.6 ~ 32.4V	41.4~46.8V	57.6~ 67.2V
Over Voltage	Protection type: Hiccup mode, recovers automatically after fault condition is removed
ENVIRONMENT
Working Temp.	-20 ~ +60℃ (Refer to output load derating curve)
Working Humidity	20 ~ 90% RH non-condensing
Storage Temp., Humidity	-20 ~ +85℃, 10 ~ 95% RH
Temp. Coefficient	±0.03%/℃ (0 ~ 50℃)
Vibration	10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC
Safety Standards	UL60950-1, CB(IEC60950-1),CCC GB4943 approved
Withstand Voltage	I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃ / 70% RH
EMI Conduction & Radiation	Compliance to EN55022 (CISPR22) Class B,GB9254 CLASS B
Harmonic Current	Compliance to EN61000-3-2,-3,GB17625.1
EMC Immunity	Compliance to EN61000-4-2, 3, 4, 5, 6, 8,11, ENV50204, EN55024, EN61000-6-1, heavy industry level, criteria A
OTHERS
Dimension	21511550mm (LWH)
Weight	1.07Kg
Packing	12pcs/carton/13.5kg/0.92CUFT
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.

Previous: 120W Single Output DC-DC Converter SD-120 series

Next: 155W Dual Output with Battery Charger (UPS Function) ADD-155 series

350w ac to dc power supply

350w dc switching power supply

ac to dc 12v power supply

ac to dc power supply 12v

Write your message here and send it to us

related products