page_banner

Products

China New Product China 100W 12V 24V Switching Mode Waterproof DC LED Transformer Power Supply, Single Output Outdoor Switch Mode Power Supply IP67

Short Description:

Constant voltage design

Universal AC input/Full range

Withstand 300VAC surge input for 5 seconds

Protections: short circuit/ over load/ over voltage

Cooling by free air convection

Small and compact size

Fully encapsulated with IP67 level

Fully isolated plastic case

Suitable for LED lighting and moving sign applications

100% full load burn-in test

Low cost, high reliability

2 year warranty


Product Detail

Product Tags

We not only will try our best to offer superb solutions to every single shopper, but also are ready to receive any suggestion offered by our prospects for China New Product China 100W 12V 24V Switching Mode Waterproof DC LED Transformer Power Supply, Single Output Outdoor Switch Mode Power Supply IP67, We can present you with one of the most competitive selling prices and good quality, because we have been much far more Qualified! So you should will not hesitate to call us.
We not only will try our best to offer superb solutions to every single shopper, but also are ready to receive any suggestion offered by our prospects for China Switching Mode Power Supply, Switching Power Supply,100w power supply, Due to the changing trends in this field, we involve ourselves into products trade with dedicated efforts and managerial excellence. We maintain timely delivery schedules, innovative designs, quality and transparency for our customers. Our moto is to deliver quality products within stipulated time.
Note on the use of waterproof power supply:

1. The input voltage of the waterproof switching power supply should be selected according to the design of the circuit. Generally, there are two kinds of input voltage: 220 volts and 110 volts. If you choose improperly, it will damage the switching power supply.

2. Do not connect the ground wire and neutral wire end of the output voltage wiring wrongly, and make sure that the grounding is reliable.

3. After the switching power supply is installed, it is necessary to conduct a power-on trial operation, check the condition of each part, and ensure that it can be powered on after it is normal.

Finally, pay attention to the heat dissipation of the waterproof switching power supply. It is best to install the switching power supply in a position with good air convection conditions, so that the heat can be easily dissipated.

100W Waterproof Single Output Switching Power Supply LPV-100 series

Constant voltage design

Universal AC input/Full range

Withstand 300VAC surge input for 5 seconds

Protections: short circuit/ over load/ over voltage

Cooling by free air convection

Small and compact size

Fully encapsulated with IP67 level

Fully isolated plastic case

Suitable for LED lighting and moving sign applications

100% full load burn-in test

Low cost, high reliability

2 year warranty

SPECIFICATIONS
OUTPUT
Model LPV-100-5 LPV-100-12 LPV-100-15 LPV-100-24 LPV-100-36 LPV-100-48
DC Voltage 5V 12V 15V 24V 36V 48V
Rated Current 12A 8.5A 6.7A 4.2A 2.8A 2.1A
Current Range 0-12A 0-8.5A 0-6.7A 0-4.2A 0-2.8A 0-2.1A
Rated Power 60W 102W 100.5W 100.8W 100.8W 100.8W
Ripple & Noise 80mVp-p 120mVp-p 120mVp-p 150mVp-p 150mVp-p 150mVp-p
Voltage Tolerance ±8% ±5%
Line Regulation ±1%
Load Regulation ±6% ±2%
Setup, Rise Time 2000ms, 25ms/230VAC   2000ms, 25ms/115VAC
Hold Up Time 50ms/230VAC   14ms/115VAC at full load
INPUT
Voltage Range 90~264VAC   47-63Hz; 127~370VDC
AC Current 2.2A/115V   1.2A/230V
Efficiency 80% 85% 87% 88% 88% 89%
Inrush Current Cold Start 75A at 230VAC
Leakage Current 0.25mA/240VAC
PROTECTION
Over Load 110-150% rated output power
Protection type: Hiccup mode, recovers automatically after fault condition is removed
Over Voltage 5.75-6.75V 13.8-16.2V 17.25-20.25V 27.6-32.4V 41.4-48.6V 55.2-64.8V
Protection type: Shut down o/p voltage, re-power on to recover
ENVIRONMENT
Working Temp.Humidity -25 ~ +70℃ (Refer to “Derating Curve”) 20-90% RH non-condensing
Storage Temp.Humidity -40℃~+80℃; 10%~95%RH
Temp.Coefficient ±0.03%/℃(0~50℃)
Vibration 10~500Hz,2G 10min,/1cycle,period for 60min,each along X,Y,Z axes
SAFETY
Withstand Voltage I/P-O/P:3KVAC
Isolation Resistance I/P-O/P>100M Ohms / 500VDC / 25℃ / 70% RH
STANDARD
Safety Standard UL8750, CSA C22.2 No.250.13-12, UL879,CSA C22.2 No.207-M89, IP67 approved, design refer to EN60950-1
EMC Standard EN61000-4-2,3,4,5,6,8,11,EN55024,light industry level, criteria A
OTHERS
Dimension 190*52*37mm(L*W*H)
Weight 0.63kg;20pcs/13.6kg/0.55CUFT
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. Derating may not be needed under low input voltage. Please check the static characteristics for more details.

1 (1)
1 (2)
1 (3)
1 (4)
1 (5)
1 (6)
1 (7)
1 (8)
1 (9)
1 (10)
1 (11)
1 (12)We not only will try our best to offer superb solutions to every single shopper, but also are ready to receive any suggestion offered by our prospects for China New Product China 100W 12V 24V Switching Mode Waterproof DC LED Transformer Power Supply, Single Output Outdoor Switch Mode Power Supply IP67, We can present you with one of the most competitive selling prices and good quality, because we have been much far more Qualified! So you should will not hesitate to call us.
China New Product China Switching Mode Power Supply, Switching Power Supply, Due to the changing trends in this field, we involve ourselves into products trade with dedicated efforts and managerial excellence. We maintain timely delivery schedules, innovative designs, quality and transparency for our customers. Our moto is to deliver quality products within stipulated time.


  • Previous:
  • Next:

  • Write your message here and send it to us