Products
Wholesale Dc Regulated Power Supply - 60W Single Output DIN Rail Power Supply MDR-60 series – Leyu
Wholesale Dc Regulated Power Supply - 60W Single Output DIN Rail Power Supply MDR-60 series – Leyu Detail:
1. The AC voltage specification used by the Din Rail power supply is 110VAC 220VAC 380VAC. Before powering on the power supply, check whether the connected voltage matches the power supply input voltage.
2. Do not connect the load before powering on for the first time, first check whether the output voltage of the power supply is consistent with the power supply of the connected equipment, so as not to damage the connected equipment.
3 The ground wire must be connected before the power supply is used. The ground wire of this type of power supply is at the position marked in the figure.
4. The power supply should be placed in a well-ventilated center.
5 The output current of the rail power supply is definitely determined; it is affirmed according to the rated standard current of the equipment supplied by the rail power supply or the uniform current value measured by a multimeter. When the ambient temperature is high, the air activity is not good, and the load is rational, an additional current margin of 20-30% should be prepared.
6 The input power of the rail power supply is determined: the rated input power of the rail power supply depends on the rated power of the supplied equipment. Under the condition of not knowing the rated power of the equipment supplied, it can be obtained based on the product value of the rated current and voltage of the equipment supplied (current X voltage = power). When the user selects the power supply, it should be greater than 15-30% of the practical power and peak power.
7 The number of DC output of the rail power supply is determined: the rail power supply normally has up to four outputs. (S-single group, D-double group, T-three group, Q-four group) According to the equipment provided.
8 The rail power supply has maintenance functions such as over/under voltage, over current, overheating maintenance and fan heat dissipation. Please stop the selection based on the actual application status to strengthen the stability and reliability of the system engineering.
9 The types of rail power supplies are: industrial iron shell type, rail type, LED outdoor rainproof and waterproof type, etc. Please choose according to practical application.
60W Single Output DIN Rail Power Supply MDR-60 series
Universal AC input/ full range
Protections: Short circuit/ Over load/ Over voltage
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
isolation classⅡ
LED indicator for power on
100% full load burn-in test
2 years warranty
| SPECIFICATIONS | ||||
| OUTPUT | ||||
| Model | MDR-60-5 | MDR-60-12 | MDR-60-24 | MDR-60-48 |
| DC Voltage | 5V | 12V | 24V | 48V |
| Rated Current | 10A | 5A | 2.5A | 1.25A |
| Current Range | 0-10A | 0-5A | 0-2.5A | 0-1.25A |
| Rated Power | 50W | 60W | 60W | 60W |
| Ripple & Noise | 80mVp-p | 120mVp-p | 150mVp-p | 200mVp-p |
| Voltage Tolerance | ±2% | ±1% | ±1% | ±1% |
| Line regulation | ±1.0% | ±1.0% | ±1.0% | ±1.0% |
| Load regulation | ±1.0% | ±1.0% | ±1.0% | ±1.0% |
| Setup, Rise Time | 500ms,30ms/230VAC 200ms,30ms/115VAC at full load | |||
| Hold Up Time | 50ms/230VAC 20ms/115VAC at full load | |||
| INPUT | ||||
| Voltage Range | 85~264VAC 47~63Hz; 120~370VDC | |||
| AC Current | 1.8A/115VAC 1A/ 230VAC | |||
| Efficiency | 78% | 86% | 88% | 87% |
| Inrush Current | Cold start 30A/115VAC 60A/230VAC | |||
| Leakage Current | <1mA/240VAC | |||
| PROTECTION | ||||
| Over Load | 105%~150% rated output power | |||
| Protection type: Constant current limiting, recovers automatically after fault condition is removed | ||||
| Over Voltage | 6.25-7.25V | 15.6-18V | 31.2-36V | 57.6-64.8V |
| Protection type: Shut down o/p voltage, re-power on to recover | ||||
| ENVIRONMENT | ||||
| Working Temp., Humidity | -20℃~+70℃; 20%~90% RH non-condensing | |||
| Storage Temp., Humidity | -40℃~+85℃; 10%~95%RH | |||
| Temp. Coefficient | ±0.03%/℃(0~50℃) | |||
| Vibration | 10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes | |||
| SAFETY | ||||
| Withstand Voltage | I/P-O/P: 3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | |||
| Isolation Resistance | I/P-O/P, I/P-FG, O/P-F/G: >100M Ohms / 500VDC/25℃/70% RH | |||
| STANDARD | ||||
| Safety Standard | Design refer to UL508, UL60950-1,TUV EN60950-1,EN50178 | |||
| EMC Standard | Design refer to EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,EN55024,EN61000-6-2，EN61204-3, heavy industry level, criteria A | |||
| OTHERS | ||||
| Dimension | 40*90*100mm(W*H*D) | |||
| Weight | 0.33Kg | |||
| Packing | 42pcs/carton/14.8kg/0.82CUFT | |||
| NOTE | ||||
| 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation. 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |
||||
Product detail pictures:
Related Product Guide:
We constantly function like a tangible group to ensure that we can give you the very best high-quality and also the very best cost for Wholesale Dc Regulated Power Supply - 60W Single Output DIN Rail Power Supply MDR-60 series – Leyu , The product will supply to all over the world, such as: UAE, Turkey, Russia, Please really feel free to send us your requirements and we'll respond to you asap. We have got a professional engineering group to serve for your just about every detailed needs. Cost-free samples could be sent for you personally to understand much more information. In an effort to meet your requires, please really feel free to make contact with us. You may send us emails and contact us directly. Moreover, we welcome visits to our factory from around the globe for much better recognizing of our organization. nd items. In our trade with merchants of numerous countries, we usually adhere for the principle of equality and mutual benefit. It is actually our hope to market, by joint efforts, each trade and friendship to our mutual advantage. We look forward to getting your inquiries.
By Donna from Austria - 2018.07.12 12:19
Production management mechanism is completed, quality is guaranteed, high credibility and service let the cooperation is easy, perfect!
By Christian from Bangalore - 2018.10.09 19:07
