China 100W Single Output Switching Power Supply NES-100 series manufacturers and suppliers

100W Single Output Switching Power Supply NES-100 series

Short Description:

Protections: Short circuit / Overload / Over voltage

Cooling by free air convection

LED indicator for power on

100% full load burn-in test

2 years warranty

Send email to us

Product Detail

Product Tags

Features

100W Single Output Switching Power Supply NES-100 series

Protections: Short circuit / Overload / Over voltage

Cooling by free air convection

LED indicator for power on

100% full load burn-in test

2 years warranty

Specifications

SPECIFICATION
OUTPUT
Model	NES-100-5	NES-100-7.5	NES-100-9	NES-100-12	NES-100-15	NES-100-24	NES-100-48
DC Voltage	5V	7.5V	9V	12V	15V	24V	48V
Rated Current	20A	13.6A	11.2A	8.5A	7A	4.5A	2.3A
Current Range	0~20A	0~13.6A	0~11.2A	0~8.5A	0~7A	0~4.5A	0~2.3A
Rated Power	100W	102W	100.8W	102W	105W	108W	110.4W
Ripple & Noise	80mVp-p	120mVp-p	120mVp-p	120mVp-p	120mVp-p	120mVp-p	150mVp-p
Voltage Adj. Range	4.75 ~	7.13 ~ 8.3V	8.55 ~ 9.9V	11.4 ~ 13.2V	14.25 ~ 16.5V	22.8 ~ 26.4V	45.6 ~ 52.8V
Voltage Adj. Range	5.5V	7.13 ~ 8.3V	8.55 ~ 9.9V	11.4 ~ 13.2V	14.25 ~ 16.5V	22.8 ~ 26.4V	45.6 ~ 52.8V
Voltage Tolerance	±2.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%
Line Regulation	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
Load Regulation	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
Setup, Rise Time	1000ms, 20ms/230VAC 1000ms, 20ms/115VAC at full load
Hold Up Time	30ms/230VAC 25ms/115VAC at full load
INPUT
Voltage Range	85 ~ 132VAC / 176 ~ 264VAC selected by switch 248 ~ 373VDC
Frequency Range	47 ~ 63Hz
Efficiency	80%	81%	83%	84%		86%	86%
AC Current	2A/115VAC 1.2A/230VAC
Inrush Current	Cold Start 45A
Leakage Current	<2mA / 240VAC
PROTECTION
Over Load	110 ~ 150% rated output power
Over Load	Protection type: Hiccup mode, recovers automatically after fault condition is removed
Over Voltage	5.75 ~ 6.75V	10.4 ~ 12.2V	13.8 ~ 16.2V	17.25 ~ 20.25V		27.6 ~ 32.4V	55.2 ~ 64.8V
Over Voltage	Protection type: Hiccup mode, recovers automatically after fault condition is removed
ENVIRONMENT
Working Temp.	-20 ~ +60℃ (Refer to “Derating Curve”)
Working Humidity	20 ~ 90% RH non-condensing
Storage Temp., Humidity	-40 ~ +85℃, 10 ~ 95% RH
Temp. Coefficient	±0.03%/℃ (0 ~ 50℃)
Vibration	10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC
Safety Standards	Design refer to UL60950-1, CB(IEC60950-1),CCC GB4943
Withstand Voltage	I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃ / 70% RH
EMC Emission	Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
EMC Immunity	Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-1, light industry level, criteria A
OTHERS
Dimension	1599738mm (LWH)
Weight	0.55Kg
Packing	30pcs/carton/17.5kg/0.97CUFT
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.