Always customer-oriented, and it’s our ultimate goal to get not only by far the most reputable, trustable and honest supplier, but also the partner for our customers for Factory made hot-sale China 200W 24V Outdoor Rainproof LED Driver, Constant Voltage LED Lighting Driver, We warmly welcome prospects, organization associations and mates from everywhere in the earth to get in touch with us and request cooperation for mutual benefits.
Always customer-oriented, and it’s our ultimate goal to get not only by far the most reputable, trustable and honest supplier, but also the partner for our customers for 200W 24V 8.3A LED Switching Power Supply, 24V 200W LED Driver Switching Power Supply, China LED Transformer, Selling our goods causes no risks and brings high returns to your company instead. It is our consistent pursuit to create value for clients. Our company is looking for agents sincerely. What are you waiting for? Come and join us. Now or never.
1. The input voltage of the waterproof switching power supply should be selected according to the design of the circuit. Generally, there are two kinds of input voltage: 220 volts and 110 volts. If you choose improperly, it will damage the switching power supply.
2. Do not connect the ground wire and neutral wire end of the output voltage wiring wrongly, and make sure that the grounding is reliable.
3. After the switching power supply is installed, it is necessary to conduct a power-on trial operation, check the condition of each part, and ensure that it can be powered on after it is normal.
Finally, pay attention to the heat dissipation of the waterproof switching power supply. It is best to install the switching power supply in a position with good air convection conditions, so that the heat can be easily dissipated.
200W Single Output Waterproof Switching Power Supply LDV-200 series
High efficiency, High reliability, Low cost
Protections: Short circuit/Over load/Over voltage/High temperature
Waterproof grade: IP67
Working Frequency: 65 KHz
Suitable for LED lighten and moving sign applications.
2 years warranty
SPECIFICATION | |||
OUTPUT | |||
Model | LDV-200-12 | LDV-200-24 | LDV-200-36 |
DC Voltage | 12V | 24V | 36V |
Rated Current | 16.5A | 8.3A | 5.5A |
Current Range | 0-16.5A | 0-8.3A | 0-5.5A |
Rated Power | 198W | 199W | 198W |
Ripple & Noise | 150mVp-p | 200mVp-p | 200mVp-p |
Voltage Tolerance | ±1% | ±1% | ±1% |
Inlet Stability | ±0.5% | ±0.5% | ±0.5% |
Load Stability | ±0.5% | ±0.5% | ±0.5% |
Setup, Rise, Hold Up Time | 200ms,20ms,30ms/230VAC | ||
INPUT | |||
Voltage Range | 180~264 VAC 47~63Hz;255~373VDC | ||
AC Current | 1.5A/230VAC | ||
Efficiency | 82% | 84% | 85% |
Inrush Current | Cold-start current 40A/230VAC | ||
PROTECTION | |||
Over Load | 105%~135% | ||
Protection:Hiccup mode, recovers automatically after fault condition is removed | |||
Over Voltage | 30~32V | 42~44V | |
Protection:Hiccup mode, recovers automatically after fault condition is removed | |||
High Tem. | ≥85℃ | ||
Protection:cut off the output, recovers automatically after fault condition is removed | |||
ENVIRONMENT | |||
Working Temp., Humidity | -10℃~+60℃,20%~90%RH | ||
Storage Temp., Humidity | -20℃~+85℃, 10%~95%RH | ||
Temp. Coefficient | ±0.03%/℃(0-50℃) | ||
Vibration | 10-500Hz,2G 10min,/1cycle,Period for 60min,Each axes | ||
SAFETY | |||
Withstand Voltage | I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC | ||
Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC | ||
STANDARD | |||
Safety Standard | EN61347-1 EN61347-2-13 IP67 | ||
EMC Standard | EN55015 EN61547 EN61000-3.4 CLASSB | ||
OTHERS | |||
Dimension | 215*69*43(L*W*H) | ||
Weight | 1.3Kg | ||
NOTE
|
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. | ||
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. | |||
3. Tolerance: includes set up tolerance, line regulation and load regulation. |
Always customer-oriented, and it’s our ultimate goal to get not only by far the most reputable, trustable and honest supplier, but also the partner for our customers for Factory made hot-sale China 200W 24V Outdoor Rainproof LED Driver, Constant Voltage LED Lighting Driver, We warmly welcome prospects, organization associations and mates from everywhere in the earth to get in touch with us and request cooperation for mutual benefits.
Factory made hot-sale China LED Transformer, 24V 200W LED Driver, Selling our goods causes no risks and brings high returns to your company instead. It is our consistent pursuit to create value for clients. Our company is looking for agents sincerely. What are you waiting for? Come and join us. Now or never.