The solar inverter system is composed of solar panel, charging controller, inverter and battery.Solar DC power generation systems do not include inverters.The process of converting AC electric energy into DC electric energy is called rectifier, the circuit that completes the rectification function is called rectifier circuit, and the device that realizes the rectification process is called rectifier equipment or rectifier.Correspondingly, the process of converting direct current energy into AC electric energy is called inverter, the circuit that completes the inverter function is called inverter circuit, and the device that realizes the inverter process is called inverter equipment or inverter.
The core of the inverter is the inverter switch circuit, referred to as the inverter circuit.The circuit through the power electronic switch on and off, to complete the inverter function.The on-off of power electronic switching devices requires certain driving pulses, which may be adjusted by changing a voltage signal.The circuit that generates and regulates pulses is often called a control circuit or control loop.The basic structure of the inverter device, in addition to the above inverter circuit and control circuit, there are protection circuit, output circuit, input circuit, output circuit and so on.
·Small in size , light in weight and potable
·Easy to use and high efficiency
·Green LED for indicates the power on
·Input & output isolation
·Muti-protection function
·USB output port: 5V500mA
·A,B,C,C,D,E,F,G socket optional
·Low voltage protection
·Over voltage protection
·Overload protection
·Over temperature protection
·Short circuit protection
Model | OPIM-0300-1 | OPIM-0300-1 | OPIM-0300-1 | OPIM-0300-2 | OPIM-0300-2 | OPIM-0300-2 |
Rated power | 300W | |||||
Peak power | 600W | |||||
Input voltage | DC12V | DC24V | DC48V | DC12V | DC24V | DC48V |
Output voltage | 100VAC or 110VAC or 120VAC±5% | 220VAC or 230VAC or 240VAC±5% | ||||
Unload current less than | 0.3A | 0.1A | 0.1A | 0.3A | 0.1A | 0.1A |
Output frequency | 50Hz±0.5Hz or 60Hz±0.5Hz | |||||
Output waveform | Modified Sine Wave | |||||
USB port | 5V 1A | |||||
Max.efficiency | 90% | |||||
Input voltage range | 10-15.5V | 20-31V | 40-61V | 10-15.5V | 20-31V | 40-61V |
Low voltage alarm | 10.5±0.5V | 21±0.5V | 42±1V | 10.5±0.5V | 21±0.5V | 42±1V |
Low voltage protection | 10±0.5V | 20±0.5V | 40±15V | 10±0.5V | 20±0.5V | 40±15V |
Over voltage protection | 15.5±0.5V | 31±0.5V | 61±1V | 15.5±0.5V | 31±0.5V | 61±1V |
Low voltage recover | 13±0.5V | 24±0.5V | 48±1V | 13±0.5V | 24±0.5V | 48±1V |
Over voltage recover | 14.8V±0.5V | 29.5V±0.5V | 59V±1V | 14.8V±0.5V | 29.5V±0.5V | 59V±1V |
Protection function | Low voltage | Alarm at first, voltage continously reduce. LED Red light on & shut sown. | ||||
Over voltage | LED Red light on, shut down | |||||
Over load | LED Red light on, shut down | |||||
Over temperature | Alarm at first, tempurature continously rise.LED Red light on & shut sown | |||||
Short circuit | LED Red light on | |||||
Input reverse polarity | Fuse burn-out | |||||
Working temperature | -10°- +50° | |||||
Storage temperature | -30°- +70° | |||||
Dimension(mm) | 190x112x67mm | |||||
Packing(mm) | 240x150x100mm | |||||
Net./gross weight(g) | 812/1032g | |||||
QTY/Ctn | 20 Pcs | |||||
Meas./Ctn(mm) | 500x405x425mm | |||||
Gross weight/Ctn(g) | 21140g | |||||
Warranty | 2 years | |||||
Configuration | Standard | |||||
Cooling method | Intelligent air cooling | |||||
Note: Our products update constantly.The technical parameter is for reference only.Please refer to our real product. |