75W Single Output Industrial DIN Rail Power Supply EDR-75 series
Universal AC input/ full range
Protections: Short circuit/ Over load/ Over voltage/ Over temperature
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
LED indicator for power on
100% full load burn-in test
Fixed switching frequency at 67KHz
2 year warranty
SPECIFICATIONS | |||
OUTPUT | |||
Model |
EDR-75-12 |
EDR-75-24 |
EDR-75-48 |
DC Voltage |
12V |
24V |
48V |
Rated Current |
6.3A |
3.2A |
1.6A |
Current Range |
0-6.3A |
0-3.2A |
0-1.6A |
Rated Power |
75.6W |
76.8W |
76.8W |
Ripple & Noise |
100mVp-p |
120mVp-p |
150mVp-p |
Voltage Adj. Range |
12-14V |
24-28V |
48-53V |
Voltage Tolerance |
±2% |
±1% |
±1% |
Setup, Rise Time | 1000ms,60ms/230VAC 1800ms,60ms/115VAC at full load | ||
Hold Up Time | 60ms/230VAC 12ms/115VAC at full load | ||
INPUT | |||
Voltage Range | 85~264VAC 47~63 Hz; 120~370VDC | ||
AC Current | 1.6A/115V 0.96A/230V | ||
Efficiency |
83% |
85% |
86% |
Inrush Current | Cold start 20A/115VAC 40A/230VAC | ||
Leakage Current | <1mA/240VAC | ||
PROTECTION | |||
Over Load | 105%~150% | ||
Protection type: Constant current limiting, recovers automatically after fault condition is removed | |||
Over Voltage | 120%~140% | ||
Protection type: Shut down o/p voltage, re-power on to recover | |||
Over Temp. | TSW1≥85℃±5℃ | ||
Protection type: Shut down o/p voltage, recovers automatically after temperature goes down | |||
ENVIRONMENT | |||
Working Temp., Humidity | -10℃~+60℃; 20%~90%RH | ||
Storage Temp., Humidity | -20℃~+85℃; 10%~95%RH | ||
Vibration | 10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes | ||
SAFETY | |||
Withstand Voltage | I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC | ||
Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC | ||
STANDARD | |||
Safety Standard | Design refer to UL508,TUV EN60950-1 | ||
EMC Standard | EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,ENV50204,EN55024,EN61000-6-2 | ||
OTHERS | |||
Dimension | 32.5*125.2*102mm(L*W*H) | ||
Weight | 0.45Kg | ||
Packing | 30pcs/16Kg/1.1CUFT | ||
NOTE | |||
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation. 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. |